cell phone jammer also requires high

cell phone jammer also requires high.
The double layer consists of two film is relatively soft, which is characterized by hardness than the Single Layer, high wear resistance than the Single layer, anti-fly linear than the Single layer. Appropriate its price is also more expensive products generally used for higher requirements. The touch screen of the main technical parameters. The touch screen covering the LCD screen above the optical properties on the LCD display is extremely important. The transmittance of the touch screen is an important parameter, the transmittance of the size of Film and Glass Materials related. Usually touch-screen transmittance between 80-90%, with the parameters required to improve costs have been increased, depending on the specific use of occasions, the appropriate choice of transmittance.  To ensure that an important element of the life and reliability of the touch screen touch screen design is in accordance with the LCD size and the main shell surface size. Following a brief introduction on the touch screen when the key size, structure and design requirements and characteristics. Assume that a touch screen shown in Figure 7, the edge region A are as follows Figure 8, which the regional characteristics and design requirements shown in Table 2. cell phone jammer will be powered off.
From the design points of view of the above table to the LCD AA to the border to about 3 mm distance to ensure the reliability of the touch screen, not all LCDs are suitable to use the touch screen. Touch screen LCD with the structure with the shown in Figure nine. In order to ensure the reliable use of the touch screen, with housing design and touch screen is also very important. The general phone shell window should be located between the touch-screen viewing area and activity area, as shown in Figure 10. Note that the buffer between the shell and touch screen washer (brown part) must be outside the AA area of the touch screen at the same time to consider the assembly errors, otherwise it will cause the touch screen misuse another cushion thickness greater than 0.4mm. When the user or customer touches cell phone jammer .cell phone jammer should be reserved in the dry and ventilated place when it is not used
The thickness of different materials and different designs are different, the general FF design of the thinnest, FG design, followed by the FP design is relatively thick. Concrete can be found in the first chapter the basic classification table. The actual design, according to the LCD and mobile phone space to select the appropriate design. Now mainstream touch screen products in general PET Film thickness 0.1-0.2mm, generally about 0.17mm, the thickness of the Glass 0.5-3mm, generally 0.5,0.7,1.1 mm, and other Plastic thickness of 0.8-3mm. Design and assembly considerations.